Principles of use of ball valves:1. For main oil and natural gas pipelines that need to be cleaned and buried underground, ball valves with full-bore and fully-welded structures should be selected; for those buried on the ground, ball valves with full-bore welded connections or flange connections should be selected ; Branch pipe, choose flange connection, welding connection, full bore or reduced bore ball valve. Non-metallic materials that resist pressure release and burst should be selected for nominal pressures above PN100 (CL600).

As our National Day's coming, our company will have holiday for 7 days according to relative state policy.

Since the ball valve usually uses rubber, nylon and polytetrafluoroethylene as the material of the seat seal, its operating temperature is limited by the material of the seat seal. The cut-off effect of the ball valve is accomplished by pressing the metal ball against the plastic valve seat under the action of the medium (floating ball valve). Under the action of a certain contact pressure, the valve seat sealing ring undergoes elastic-plastic deformation in local areas.

The V-shaped opening ball valve belongs to the fixed ball valve and the single-seat sealed ball valve. The adjustment performance is the best among the ball valves, and other types of ball valves are basically not used for adjustment. The sealing principle is similar to the sealing valve seat after fixing the ball body of the ball valve, but the movable valve seat structure with the preloading force of the plate spring is adopted.

Fixed ball valves are mainly used in high-pressure and large-diameter ball valves. In addition, the transfer of support force and medium force from the valve seat seal to the valve stem, support sleeve or support plate will greatly reduce the torque required to operate the valve. With the correct selection of sealing elements, this form of ball valve also guarantees complete sealing in both directions.